YONGHESHENG — Reliable Cable Insulation & Sheathing Compounds

📧 Aden@shyhsgroup.com📞 +86-21-61807268
Technical Data

Technical Specifications

Typical physical property data, subject to batch test reports.

No.Test ItemUnitInternal ControlTypical ValueTest Standard
1Tensile Strength (before irradiation)MPa>6.06.5ISO 527-2
2Tensile Strength (after irradiation)MPa>9.010ISO 527-2
3Elongation at Break (before irradiation)%>150195ISO 527-2
4Elongation at Break (after irradiation)%>150170ISO 527-2
5Volume Resistivity at 20 ℃Ω·cm>1.0×10¹³1.0×10¹⁴IEC 60093
6Dielectric Strength at 20 ℃kV/mm>2026IEC 60243-1
7Limiting Oxygen Index%>3236ISO 4589-2
8Hot Deformation (after irradiation,125 ℃×4 h)%<5020IEC 60811-301
9(200 ℃×15 min×0.2 MPa, after irradiation)IEC 60811-507
9.1Elongation under Load%<2515IEC 60811-507
9.2Permanent Set after Cooling%<5.00.1IEC 60811-507
10Thermal Ageing (after irradiation,158 ℃×168 h)IEC 60811-401
10.1Retained Tensile Strength%>7596IEC 60811-401
10.2Retained Elongation at Break%>7590IEC 60811-401
11Oil Immersion Test in IRM902 (100 ℃×70 h)IEC 60811-201
11.1Retained Tensile Strength%>5072IEC 60811-201
11.2Retained Elongation at Break%>5078IEC 60811-201
12Oil Immersion Test in IRM903 (70 ℃×168 h)IEC 60811-201
12.1Retained Tensile Strength%>5070IEC 60811-201
12.2Retained Elongation at Break%>5076IEC 60811-201
13Heat Shock (after irradiation,150 ℃×1 h)-No crackingNo crackingIEC 60811-506
14Low-temperature Impact Brittleness (-40 ℃)Broken / Total Specimens0/300/30ISO 974
15Corrosive Gas Performance after Combustion
15.1Halogen Acid Gas Contentmg/g<5.00.6IEC 60754-2
15.2pH Value->4.36.2IEC 60754-2
15.3ConductivityμS/mm<10.01.0IEC 60754-2
16Environmental Requirement-Compliant with RoHS, REACH, low-smoke halogen-freeCompliant with RoHS, REACH, low-smoke halogen-free
17Toxicity Index-≤52.0NES 713
18Specific Gravityg/cm³≤1.601.50ISO 1183-1
19Shore HardnessShore D50±350ISO 868
⚠️ This product is homogeneous pellets, compliant with RoHS, REACH and other relevant environmental regulations. Its performances meet the specified values in Table 1, and the color shall comply with customer’s color requirements.
Recommended

Extrusion Process

Recommended extruder zone temperature settings:

(1)Actual temperature setting shall achieve smooth cable surface under given line speed. (2) Recommended irradiation dosage for finished cable made from YHS-1255YL-S: 17-18 MRAD, subject to hotset test results.

Zone 1Zone 2Zone 3Zone 4AdapterHeadDie
130±5150±5160±5170±5170±5175±5175±5
Packaging & Storage

Packaging and storage

1

  • Packaging: 25 kg per bag; inner aluminiumplastic bag, outer kraft paper bag. The certificate on outer package shall mark product name, model, weight, production batch, colour, production date and supplier name.
  • Transportation & Storage: Protect from direct sunlight and rain during transit. Store in clean, dry and wellventilated environment.
  • Remark: If stored more than 3 months under environment of ≤30 °C and relative humidity ≥60 %, it is recommended to dry the compound at 60 °C70 °C for minimum 4 hours before processing.