Technical Data
Technical Specifications
Typical physical property data, subject to batch test reports.
| Properties | Unit | Typical Value | Test Method |
|---|---|---|---|
| Density | g/cm3 | 1.53±0.03 | IEC 60811-606 |
| Hardness,shore A | - | 90 | ISO 868 |
| Tensile strength | MPa | 15.6 | IEC 60811-501 |
| Elongation at break | % | 300 | IEC 60811-501 |
| Thermal deformation at 120℃ | % | 32 | IEC 60811-505 |
| Low temperature brittleness | ℃ | -15,Pass | ISO 974 |
| Thermal stability at 200℃ | min | 120 | IEC 60811-405 |
| Volume resistivity at 20℃ | Ω.m | 1.5 × 10¹⁰ | IEC 60093 |
| Dielectric strength | MV/m | 25 | IEC 60243 |
| Oxygen index | % | 34 | ISO 4589-2 |
| Halogen emission | mg/g | 160 | IEC 60754-1 |
| Thermal ageing property, 100℃× 168h | |||
| Variation of tensile strength | % | +11.3 | |
| Variation of elongation at break | % | -13.2 | IEC 60811-401,IEC 60811-406 |
| Loss of mass | mg/cm2 | 1.1 | |
| Oil-resistant testI, RM902, 100℃× 168h | |||
| Variation of tensile strength | % | +15.8 | IEC 60811-404 |
| Variation of elongation at break | % | -23.5 |
Processing Guide
Recommended Processing Parameters
1
PRODUCT CHARACTERISTICS
- Excellent mechanical performance
- Good extruding process performance
- Good flame retardant performance
- Good oil-resistant performance
2
Extrusion temperature for reference:
- When extrude the material, normal PVC/PE screw can be used.
- The recommend temperature as follows: Zone1 145 Zone2 155 Zone3 165 Zone4 175 Zone4 175 Die 170 Head 170
- If the material is stored for more than three months, it is recommended for drying at 80℃ for 1-2 hours.