Technical Data
Technical Specifications
Typical physical property data, subject to batch test reports.
| No. | Project | Unit | Typical values | Test method International | |
|---|---|---|---|---|---|
| 1 | Density | g/cm³ | 1.34 | ISO 1183-1 | |
| 2 | Elongation at break | % | 195 | ISO 527-2 | |
| 3 | Tensile strength | MPa | 13.5 | ISO 527-2 | |
| 4 | Limiting Oxygen Index | % | 32 | ISO 4589-2 | |
| 5 | Low temperature embrittlement temperature | ℃ | -15 Pass | ISO 974 | |
| 6 | Aging performance | ||||
| Aging temperature | ℃ | 100±2 | IEC 60811-1-2 | ||
| Aging time | h | 168 | IEC 60811-1-2 | ||
| Maximum rate of change of tensile strength | % | 5.8 | IEC 60811-1-2 | ||
| Maximum rate of change of fracture elongation | % | 8.7 | IEC 60811-1-2 | ||
| 7 | Tensile Strength Retention (IRM902 Oil) | % | 85 | IEC 60811-2-1 | |
| Elongation Retention (IRM902 Oil) | % | 75 | IEC 60811-2-1 | ||
| 8 | pH of combustion gas | - | 5.6 | IEC 60754-2 | |
| 9 | Combustion gas conductivity | μs/mm | 2.5 | IEC 60754-2 | |
| 10 | Volume resistivity 20℃ | Ω·m | 1.5×10¹² | IEC 60093 | |
| 11 | Hardness HA 15s | - | 96 | ISO 868 |
⚠️ 1 The samples are tested according to the methods specified in GB/T 32129-2015, JB/T 10707-2007. 2 Typical values should not be used as evaluation indicators. 3 Can be customized according to customer needs.
Recommended
Extrusion Process
This product has excellent processing performance and can be processed by general extruder. It is recommended to use low compression ratio screw with L/D≥20 and compression ratio of 1:1.2. The recommended extruder process temperature parameters are as follows:
The above process temperature can be adjusted according to the specific situation.
Generally, the maximum temperature should not exceed 175℃ . The most suitable extrusion temperature also depends on factors such as the compression ratio, length- diameter ratio and screw structure of the extruder
| Zone1 | Zone2 | Zone3 | Zone4 | Zone5 | Nose |
|---|---|---|---|---|---|
| 125℃ | 135℃ | 140℃ | 145℃ | 150℃ | 155℃ |
Packaging & Storage
Packaging and storage
1
- Packaging: Net weight 25kg per bag, aluminum-plastic composite film inner bag, kraft paper composite bag outer packaging, or large packaging according to customer requirements. Packaging specifications can be negotiated by both parties.
- Transportation: During transportation, the product should not be damaged by abnormal conditions such as sunlight, rain, water immersion, exposure to high temperature, etc. It should be kept clean, dry, and free from pollution, and the packaging should be kept intact.
- Storage: The product should be stored in a clean, cool, dry and ventilated warehouse at room temperature. The storage period of the cable material should not exceed 6 months from the date of production.



