Technical Data
Technical Specifications
Typical physical property data, subject to batch test reports.
| NO. | Test items | Unit | Standard | Typical Value |
|---|---|---|---|---|
| 1 | Tensile strength | MPa | ≥10.0 | 11.5 |
| 2 | Elongation at break point | % | ≥150 | 175 |
| 3 | Volume electrical resistivity @20℃ | Ω·m | ≥1.0×10¹² | 3.5×10¹² |
| 4 | Limit oxygen index(LOI) | % | ≥35 | 38 |
| 5 | Hot pressure test@90℃ | % | ≤50 | 20 |
| 6 | Thermal oven-aged @110℃×168h | |||
| The retaining of Tensile strength | % | ≤±20 | +5 | |
| The retaining of elongation | % | ≤±20 | -5 | |
| 7 | Impact Brittleness Temperature@-40℃ | - | 0/30 | 0/30 |
| 8 | The environmental properties of burned material | |||
| 8.1 | The acid gas | mg/g | ≤5.0 | 1.0 |
| 8.2 | pH of gas solution | —— | ≥4.3 | 6.1 |
| 8.3 | Conductivity of gas solution | us/mm | ≤10.0 | 1.2 |
| 9 | Environmental required | - | Conformed to RoHS、REACH | |
| 10 | Density | g/cm³ | ≤1.60 | 1.47 |
| 11 | Hardness Shore A 15Second | Shore A | 93±3 | 95 |
⚠️ Data should not be specification work. In case of colored products, the values could vary slightly by color.
Recommended
Extrusion Process
Note: The temperature for cable extrusion should be set at the situation of good cable surface performance.
| Zone1 | Zone2 | Zone3 | Zone4 | Neck | Die | Eye |
|---|---|---|---|---|---|---|
| 110±5℃ | 125±5℃ | 145±5℃ | 155±5℃ | 160±5℃ | 160±5℃ | 160±5℃ |
Packaging & Storage
Packaging and storage
1
Storage
- Package: 25kg per bag, Alumni-plastic inner, Kraft paper outside.
- Storage: no rain, no direct sunlight. Dry it at 60℃ ~ 70℃ about 4 hours if the material was storage more than 3 months before used.
2
Suggestion for processing
- The compression value of extrusion screw should be 1.2~2.0
- The time of material heated in the barrel should not exceed 10mins, or it maybe decomposed.



