Technical Data
Technical Specifications
Typical physical property data, subject to batch test reports.
| Test Item | Unit | Typical Value | Test Method |
|---|---|---|---|
| Density | g/cm³ | 1.54 | GB/T 1033.1 |
| Low-temperature embrittlement temperature (-40℃) - Number of failures | pcs | 0 | GB/T 5470 |
| Thermal deformation (90℃×4h) | % | 12 | GB/T 8815 |
| Tensile Strength | MPa | 18.2 | GB/T 1040 |
| Elongation at Break | % | 165 | GB/T 1040 |
| Thermal Aging Performance (121℃×168h) | GB/T 2951.12 | ||
| -- Change rate of tensile strength | % | +10 | |
| -- Change rate of elongation at break | % | -15 | |
| Volume Resistivity at 20℃ | Ω·m | 5.2×10¹² | GB/T 1410 |
| Dielectric Strength | MV/m | 26 | GB/T 1408.1 |
| Oxygen Index | % | 40 | GB/T 2406 |
| Acidic Gas | GB/T 17650.2 | ||
| -- Conductivity | μs/mm | 0.89 | |
| -- PH Value | -- | 5.71 | |
| Maximum Smoke Density (Dm) | ASTM E 662 | ||
| -- Flaming Method | -- | 51 | |
| -- Non-flaming Method | -- | 201 | |
| Toxicity Index | -- | 1.1 | NES 713 |
| 94V-0 | -- | Pass | UL 94 |
Recommended
Extrusion Process
Optimal extrusion results can be achieved using a low compression ratio screw of 1:1.2. PVC/PE screws can also be used for extrusion.
The melt temperature should be controlled between 160-175℃, with a maximum not exceeding 180℃.
If the material is stored in a humid environment for a long time, drying treatment is recommended: drying temperature of 80℃ for 1-2 hours.
| Zone1 | Zone2 | Zone3 | Zone4 | Zone5 | Head | Die |
|---|---|---|---|---|---|---|
| 130℃ | 145℃ | 150℃ | 160℃ | 165℃ | 165℃ | 160-165℃ |
Packaging & Storage
Packaging and storage
1
- Store in a dry and well-ventilated warehouse.
- The product is packaged in 25kg paper-plastic composite bags or 1000kg bulk bags.
- Custom packaging is also available upon customer request.


