Technical Data
Technical Specifications
Typical physical property data, subject to batch test reports.
| Item | YHS6926 | YHS6908 | Method |
|---|---|---|---|
| Density g/cm³ | 1.58 | 1.53 | ISO 1183-1 |
| Melt index g/10min | 2.1 | 5.1 | ISO 1133, (b) |
| Tensile strength MPa | 11.6 | 13.1 | IEC 60811-1-1 |
| Elongation @ break % | 180 | 220 | IEC 60811-1-1 |
| Aging ℃*Hs | 100*168 | 100*168 | IEC 60811-1-2 |
| TS after aged MPa | 13.2 | 14.5 | |
| EB after aged % | 151 | 191 | |
| Oxygen index % | 45 | 42 | ISO 4589-2 |
| Smoke Density - Flaming | 54 | 54 | ASTM E-662 |
| Smoke Density - Flameless | 201 | 188 | |
| Hardness SHA | 97 | 96 | ASTM D2240 |
| High-temperature pressure ℃*Hs | 90*4 | 90*4 | IEC 60811-3-1 |
| Deformation % | 20 | 23 | |
| Low-temperature impact @ -25℃ | PASS | PASS | IEC 60811-1-4 |
| Thermal shock @130℃ | PASS | PASS | IEC 60811-3-1 |
| Halogen PPM | 0 | 0 | IEC 60754 |
| PH (min) | 6.2 | 6.0 | IEC 60754 |
| Electrical conductivity (max) μS/mm | 2.8 | 0.8 | IEC 60754 |
| Volume resistivity Ω·m | 1.3*10¹² | 1.8*10¹² | IEC 60093 |
Recommended
Extrusion Process
Melt temperature: The extrusion temperature should be below 175°C. Screw and die head: It is recommended to use a screw and die head with a low compression ratio, with a compression ratio CR of 1:1,2.
For special extruders or applications, please contact us for more process information.
| Zone1 | Zone2 | Zone3 | Zone4 | Zone5 | Neck | Head | Mold |
|---|---|---|---|---|---|---|---|
| 100℃ | 130℃ | 140℃ | 145℃ | 150℃ | 155℃ | 160℃ | 165℃ |
Packaging & Storage
Packaging and storage
1
Drying
- Our materials are delivered in aluminum-plastic bags (either in bags or boxes). If the packaging is normal, no special drying treatment is required for the materials. If the material is stored in a humid environment for a long time, it is recommended to carry out a drying treatment at 70°C for 4 hours in a dehumidifying dryer.
2
Coloring
- NHFR cable materials for B1 grade flame-retardant cables can be colored. We can provide a full range of color masterbatch products to meet the coloring requirements of materials.
3
- **We suggest that customers conduct a comprehensive assessment of their final cable structure to ensure the suitability of the materials.**



