YONGHESHENG — Reliable Cable Insulation & Sheathing Compounds

Technical Data

Technical Specifications

Typical physical property data, subject to batch test reports.

No.ItemsUnitStandard ValueTypical ValueTest Method
1Densityg/cm31.49±0.021.49ISO 1183
2HardnessSA95±396ISO 868
3Tensile StrengthMpa≥1013IEC 60811-401
4Elongation at Break%≥160180IEC 60811-401
5Ageing Property(100±2)℃*168hIEC 60811
5.1The maximum value of the rate of change in tensile strength%±309.6IEC 60811-404
5.2The maximum value of the rate of change in elongation after fracture%±30-8.5IEC 60811-404
6Thermal Deformation (90℃)%≤5014IEC 60811-508
7Low Temperature Brittleness Test (-25℃)Invalidation≤15/300/30ISO 974
8Volume Resistivity at 20℃Ω·m≥1.0*10¹²5.7*10¹²IEC 60167
9Dielectric StrengthMV/m≥2025IEC 60243.1
10Oxygen Index%≥3034ISO 4589-2
11Content of HCl and Br%≤0.50IEC 60754-1
12Content of HF%≤0.50IEC 60684-2:2003
13ConductivityμS/mm≤101.8IEC 60754-2
14pH--≥4.35.7IEC 60754-2
15Temperature index#N/A≥250PassIEC 4589-3
⚠️ Note: The above typical value is only for product introduction,not for quality assurance. The quality assurance is subject to Specification For Approval sigen by two sides.
Recommended

Extrusion Process

The compound can be processed with conventional extruders, and the screw with a mininum 20:1 L/D and a compression ratio of 1.5 is recommended.

The following temperature profile of extruder is recommended:

Note: Compound should be dried at 70~80℃ before use, which storage time has exceeded 2

Zone 1Zone 2Zone 3Zone 4Zone 5HeadDie
125℃135℃145℃155℃155℃160℃160℃
Packaging & Storage

Packaging and storage

1

  • Packaging:25kg/bag, Alumnium foil and PE membrance inside bag, and kraft outside bag.
  • Store and transport: Avoiding in direct sunlight and weathering. The storage place should be in clean, cool, dry, and ventiltated conditions.
  • Shelf life: 6 months from the date of manufacture.