YONGHESHENG — Reliable Cable Insulation & Sheathing Compounds

Technical Data

Technical Specifications

Typical physical property data, subject to batch test reports.

No.ItemsUnitStandard ValueTypical ValueTest Method
1Densityg/cm31.48±0.031.50ASTM D 792
2HardnessSD47±348ASTM D 2240
3Tensile StrengthMpa≥12.513.8IEC 60811-1-1
4Elongation at Break%≥150184IEC 60811-1-1
5Ageing Property(100±2)℃*168hIEC 60811
5.1Variation of Tensile Strength%±3012IEC 60811-1-2
5.2Elongation Rate%±30-15.2IEC 60811-1-2
6Thermal Deformation (90℃)%≤3013NBR 6239
7Brittle Temperature-35℃≤15/300/30ASTM D 746
8Volume Resistivity at 20℃Ω·m≥1.0*10¹²8.9*10¹²ASTM D 257
9Oxygen Index%≥3637ASTM D 2863
10Thermal Impact Test,(150℃*1h)(No crack)No crackNo crackIEC 60811-3-1
11Content of HCl and Br%≤0.50IEC 60754-1
12Content of HF%≤0.10IEC 60684-2:2003
13ConductivityμS/mm≤201.6IEC 60754-2
14pH--≥4.35.8IEC 60754-2
15Toxicity Index--≤50.79NBR 12139
16Smoke density - light transmittance%≥7589NBR 11300
⚠️ The above typical value is only for product introduction,not for quality assurance. The quality assurance is subject to Specification For Approval sigen by two sides.
Recommended

Extrusion Process

The compound can be processed with conventional extruders, and the screw with a mininum 20:1 L/D and a compression ratio of 1.5 is recommended.

The following temperature profile of extruder is recommended:

Note: Compound should be dried at 70~80℃ before use, which storage time has exceeded 2

Zone 1Zone 2Zone 3Zone 4HeadDie
130℃140℃155℃160℃160℃160℃
Packaging & Storage

Packaging and storage

1

  • Packaging:25kg/bag, Alumnium foil and PE membrance inside bag, and kraft outside bag.
  • Store and transport: Avoiding in direct sunlight and weathering. The storage place should be in clean, cool, dry, and ventiltated conditions.
  • Shelf life: 6 months from the date of manufacture.